1. Adjust the flame
1. During use, as the product's gas content decreases and the ambient temperature changes, the flame height will vary to a certain extent
This is a normal phenomenon; you can adjust the flame height moderately
2. If you need to adjust the flame height, please use a flat-head screwdriver to align with the groove of the flame adjuster;
If the lighter itself has an adjustment ring, you can directly use your finger to adjust by turning it in the direction of the (-) arrow (clockwise) to lower the flame height
Turn in the direction of the (+) arrow, that is, counterclockwise, to increase the flame height.
Note: Rotate counterclockwise, do not exceed half a turn from the normal flame height base.Otherwise, it may damage the product
2. Gas Filling Method
1. When filling gas, there must be absolutely no sparks or fire nearby; safety must be ensured.Do not smoke while refueling;
2. When refilling the standard model lighter, please turn it upside down and shake the gas bottle vigorously a few times
Align the gas bottle outlet with the intake port at the bottom of the lighter and press firmly several times, each time holding for about 2 seconds
3. If the gas cannot be filled, it might be because there is excess air trapped in the tank; in this case, you can deflate it
Use a small screwdriver to align with the air intake for rapid deflation before refilling
【If there is external spray, rotate the nozzle appropriately to achieve full contact], press moderately 2-3 times, and be careful not to ignite immediately
4. After inflating, wait about 1 minute for the newly added gas to adjust to room temperature before attempting to ignite
If it can't ignite, flame adjustment is needed; if it still doesn't ignite after adjustment,
Adjust the valve to the smallest setting, then release all the air, refill it again, and gradually increase the adjustment.
Third, Important Notes
1. Open flame gas lighters are likely to not ignite above an altitude of 2500 meters.Inflatable lighters are likely to fail to ignite at altitudes above 1800 meters.
Charging Lighter Basics
Product Description: Charges via USB interface, can be connected to any charger with an output voltage of DC5V and output current of 1.0A, such as computers, phone chargers, power banks, or car chargers; charges fully in 1.5-2 hours with a red indicator light on during charging that automatically turns off when fully charged
Warm Tips
1. Do not put this product into water or other liquids, otherwise it will cause a short circuit.
2. Please disconnect the power promptly after charging (usually takes 2 hours to fully charge). Do not leave the fully charged battery connected to the power source for a long time; overcharging can shorten the battery's lifespan.
3. When the battery is about to run out of power, the duration of the arc spark shortens. Please recharge promptly at this time; using it before the battery is completely discharged will extend its lifespan.
4. Please do not keep it lit for a long time; it is recommended not to use it for more than 10 seconds each time to extend the product's lifespan.
Five, Maintenance
1. Frequently wipe gently with a soft cotton cloth to maintain the lighter's shine.
2. After using for a period of time, the electroplated metal surface will lose its luster. This is a normal phenomenon and becomes more obvious when in contact with chemical substances or in high-temperature environments.I suggest you purchase a professional "polishing tool" to remove dark spots.
3. Surfaces with high gloss finish require careful maintenance because they are prone to scratches.
4. Since batteries operate on the principle of chemical reactions, if not used for a long time, it is recommended to charge once every six months to prevent over-discharge and affect their lifespan.
5. A high-altitude weapon that ignites grasslands, adaptable to various altitude and climate conditions, with free ignition.
